Port Coquitlam and Port Moody sit side by side at the east end of the Burrard Inlet, but their commercial buildings are quite different. PoCo has working industrial areas in the Dominion Triangle and Mary Hill and a traditional downtown along Shaughnessy Street. Port Moody has mixed-use neighbourhoods like Suter Brook and Newport Village and a well-known row of craft breweries on Murray Street. Papa Flooring Ltd provides commercial flooring in Port Coquitlam and Port Moody, and as a Port Coquitlam flooring contractor we treat each of these areas on its own terms.
Epoxy flooring in Port Coquitlam's Dominion Triangle and Mary Hill
The industrial units in PoCo hold trades, fabricators, distributors and auto services. Floors here take impact, rolling loads, oil, coolant and road grit carried in on tires. Epoxy flooring in Port Coquitlam units is a common answer because a properly installed epoxy or resin system seals the concrete, resists chemicals and wipes clean. Anti-slip aggregates can be added where floors get wet, and colour-coded zones help mark walkways and work cells.
Where the priority is forklift traffic and low maintenance rather than chemical resistance, polished concrete is often a better fit. Many older slabs need grinding, crack repair or removal of a failed coating first, and we include that subfloor prep in the proposal as its own line item.
Shaughnessy Street and downtown PoCo storefronts
Downtown Port Coquitlam is a mix of independent shops, offices, clinics and services. These businesses typically want a floor that looks sharp, stands up to wet footwear and goes in without a long closure. Commercial LVT handles most of this well, with carpet tile in back offices. We often install after hours so a shop can open as usual the next morning.
Suter Brook, Newport Village and the Murray Street breweries
Port Moody's mixed-use developments put retail and restaurants at street level with residences above. That means noise rules, strata or property management requirements, and tight access, all of which we plan around before the first day on site.
Restaurants and brewery tasting rooms are among the hardest-working floors anywhere. Kitchens and brewhouses see standing water, grease, hot washdowns and heavy kegs. These areas typically suit seamless resin flooring with integral coving and slip-resistant texture, or safety flooring designed for wet areas. Front-of-house spaces can use polished concrete or LVT for a warmer finish. Our restaurant and hospitality flooring page covers this in more depth.
| Area | Common building type | Systems that typically fit |
|---|---|---|
| Dominion Triangle and Mary Hill | Industrial and trade units | Epoxy and resin, polished concrete |
| Shaughnessy Street | Shops, offices, clinics | Commercial LVT, carpet tile |
| Suter Brook and Newport Village | Ground-floor retail and restaurants | LVT, polished concrete, safety flooring |
| Murray Street | Breweries and tasting rooms | Slip-resistant resin, polished concrete |
Moisture, inlet weather and entrances
Both cities get plenty of rain, and some of the newer mixed-use buildings sit on concrete that is still drying out. We test slab moisture before installing resilient floors, typically with ASTM F2170 in-situ relative humidity testing, and recommend mitigation where needed. Good entrance matting and slip-resistant finishes at doors reduce wet-weather slip risk.
Every project includes a site assessment, line-item proposals, a single point of contact and a clean handover backed by our workmanship guarantee. We work with owners, property managers and general contractors in industrial, retail and hospitality settings. Request a Consultation or send us your drawings. We also cover nearby Coquitlam and Maple Ridge.
Frequently asked questions
Is epoxy flooring a good choice for Port Coquitlam industrial units?
For many units, yes. Epoxy seals the concrete, resists oil and chemicals and is easy to clean. Where heavy forklift traffic is the main concern, polished concrete may be the better option, and we can explain the trade-offs on site.
What flooring do you recommend for Port Moody breweries and restaurants?
Wet production and kitchen areas typically suit seamless, slip-resistant resin with coved edges. Tasting rooms and dining areas often use polished concrete or LVT. We plan the transition between the two carefully.
Can you work in mixed-use buildings with residents upstairs?
Yes. We follow building rules on work hours, noise and access, and schedule loud prep like grinding for permitted times.
Do you cover both Port Coquitlam and Port Moody?
Yes. As a Port Coquitlam flooring contractor we serve both cities, along with the rest of the Tri-Cities and Greater Vancouver.